Facebook Pixel
LTP MPG Polished Wall And Floor Tile Sealer
LTP MPG Polished Wall And Floor Tile Sealer
LTP Tile and Stone Cleaning, Sealing and Maintenance

LTP MPG Polished Wall And Floor Tile Sealer

SALE From £11.00 £9.17 RRP £15.72
SALE From £11.00 £9.17 RRP £15.72
More Information

- Colourless impregnating sealer for wall and floor tiles
- Protects surfaces from oil, dirt, grease and water
- Easy to apply and fast-acting
- Suitable for exterior and interior surfaces
- Will not alter the polish finish on surfaces

Full Description

LTP MPG is the perfect impregnating sealer for polished wall and floor tiles. Once it has been applied this floor sealer will not alter the polish finish already present on the surface. This slate sealer and marble sealer will protect surfaces it has been applied to from grease, oil, water and dirt.

This tile sealer is easy to apply and can work fast allowing for the quick completion of large areas. This wall sealer can be used on walls, floors, worktops and fireplaces.

Suitable for Use On:
- Polished Porcelain
- Marble
- Limestone
- Slate
- Granite

What is more, LTP MPG can be used on both exterior and interior surfaces.

- Approximately 10 - 30 metres/litre varying based on the surface porosity

Tips for Usage:
- Surfaces should be clean and dry before treatment with LTP MPG
- Remove any factory-applied sealer or wax from tiles before sealing
- Test this impregnating sealer on a discrete area before application to make sure the final result is what you expected

It is imperative that LTP MPG is not applied in temperatures that are over 25°C. To ensure this is the case, turn underfloor heating is switched off. 

Method of Use:
- Apply a thin layer of LTP MPG evenly with a soft cloth
- Buff well using a clean, dry cloth or machine after 20 minutes when the sealer is still wet
- Allow 4 hours for the sealer to dry
- Apply a second coat on more porous surfaces
- Remove excess sealer from the surface and buff between each coat

Over applied sealer will dry leaving a greasy residue on the surface. To remove, apply white spirit or a little more sealer and then buff immediately. Always test on an inconspicuous area first. Treated areas should be dry enough to walk on after about 4 hours but will take 3 days to become fully resistant.

- Store in a cool, dry and frost-free environment
- Store the unopened container for no longer than 4 years

- Keep out of the reach of children
- Keep away from sources of heat or open flames
- Wear eye protection
- Wear protective gloves
- Use in well-ventilated areas

Write Your Own Review
You're reviewing:LTP MPG Polished Wall And Floor Tile Sealer
Your Rating
You may also like...