LTP Antique Wax medium brown ageing wax
- Medium brown wax for ageing quarry tiles,terracotta and stone.
- Provides an aged appearance
- Gives treated surfaces an excellent shine
LTP Antique Wax 2.5L is a medium brown wall and floor tile polish.
Suitable for Use On:
- tumbled marble
- flamed and rough cut granite
Provides an aged appearance A soft paste wax, blended from three types of wax which gives treated surfaces an excellent shine. It provides a resilient protective layer against water, dust, dirt and a variety of commonly found household contaminants. LTP Antique Wax comes ready to use and is easily applied by cloth before polishing to a finish. Suitable for use on travertine, limestone, sandstone, slate, tumbled marble, flamed and rough cut granite, terracotta, quarry and brick. Maintain with LTP Waxwash on floors and LTP Stonewash on walls.
LTP Antique Wax medium brown ageing wax Coverage
On most floors, 1 litre /10 square metres (two coats)
The surface to be treated should be completely, clean, dry and any pre-polish sealer thoroughly cured.
Apply sparingly with a soft fluff-free cloth ensuring that the area of application is manageable.
Quickly buff wax to a shine using a short haired brush, soft cloth or mechanical polisher.
When using LTP Antique Wax on higher absorbency floors, the wax may be absorbed into the surface unevenly, consequently proving difficult to shine. Therefore, when treating such floors, it may be necessary to reduce the absorbency by pre-applying a suitable impregnating sealer. LTP Antique Wax can be applied to surfaces that have been impregnated with LTP Boiled Linseed Oil, Stone Oil, Mattstone and Colour Intensifier. The type of impregnator used will depend on the type of material that is being sealed.
Ensure that areas, where the seal has been worn or damaged, are re-waxed. Apply a fresh coat of LTP Antique Wax to your floor should it begin to show signs of stain absorption. This should be done after the surface has been washed and allowed to thoroughly dry.
NB. Test the wax on an inconspicuous area prior to general application. LTP Antique Wax may not properly harden if too much polish is applied or if applied to surfaces containing moisture. In either case it may be difficult to obtain a shine. It will not polish properly if used on partially cured sealers or if the floor has not been properly pre-sealed. This product may be less ably applied in cold weather, in which case it may help to warm the can in tepid water (N.B. Do not use naked flame).
- LTP Power Stripper High Performance Intensive CleanerSALE From £17.46 £14.55 RRP £20.34
- LTP Colour Intensifier and Stainblock Impregnating SealerSALE From £11.94 £9.95 RRP £15.90
- LTP Ironwax Satin Self shine Satin Finish SealerSALE From £15.54 £12.95 RRP £19.31
- LTP Ironwax Gloss Finish Surface Sealer for Interior UseSALE From £13.74 £11.45 RRP £18.62