Facebook Pixel
LTP Solvex Epoxy Grout Sealer and Wax Remover
LTP Solvex Epoxy Grout Sealer and Wax Remover
LTP Tile and Stone Cleaning, Sealing and Maintenance

LTP Solvex Epoxy Grout Sealer and Wax Remover

SALE From £13.58 £11.32 RRP £19.40
SALE From £13.58 £11.32 RRP £19.40
More Information

- High-Performance Remover
- A Powerful Non-Caustic Stripper
- Removes Wax & Silicone
- Acrylic & Polyurethane Sealers

Full Description

LTP Solvex is a high-performance remover suitable for epoxy grout, sealer and wax. Most effective for removing most wax, oil, silicone, acrylic, polyurethane sealers and residual epoxy grout. LTP Solvex is a powerful non-caustic stripper that softens most types of surface sealer, which can then be removed with ease

Once all surfaces are washed and rinsed, then it becomes the perfect time for re-sealing. LTP Solvex will remove silicone and acrylic waxes, adhesive polymers and epoxy grout residues in just twenty-four hours

Suitable for Use On:
- Silicone
- Acrylic
- Polyurethane Sealers
- Residual Epoxy Grout For Stone
- Travertine
- Terracotta
- Slate
- Sandstone
- Flag-stones
- Quarry Tiles
- Glazed Ceramic
- Porcelain

Coverage and Dilution Guide (1 Litre):
- Light Stripping: approximately 8-10 square metres
- Deep Stripping: approximately 5 square metres

Method of Use:
- Pour LTP Solvex into a glass or metal container
- The surface must be completely clean, dry and free from contamination
- Apply generously with a cloth or brush
- Work in manageable areas and do not brush out
- Leave for up to 30 minutes, but do not allow LTP Solvex to completely dry out
- If drying should occur within 30 minutes apply a little more solution
- Use a stiff brush or abrasive pad to remove any softened coating that has remained
- Repeat the process if unwanted material remains
- Wash down with a dilute solution of LTP Grimex, rinse with plenty of water and the surface should be left to dry for a min 24hrs before re-sealing

Additional Information:
- It is important to test the solution on an inconspicuous area before general application
- Use natural fibre brushes, brushes made from synthetic fibres may be damaged by LTP Solvex
- Viscous solution SHOULD NOT drip if applied on vertical surfaces
- If removing residues from epoxy grout; apply to make sure to avoid prolonged contact with the joint as well
- Acrylic surfaces should be protected, such as baths and shower trays from contact

The LTP Solvex Epoxy Grout, Sealer and Wax Remover is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.

Write Your Own Review
You're reviewing:LTP Solvex Epoxy Grout, Sealer and Wax Remover
Your Rating