Facebook Pixel
Faber Ys One Anti Slip Treatment
Faber Ys One Anti Slip Treatment Faber Ys One Anti Slip Treatment
Faber Surface Care

Faber Professional Ys One Water Based Anti Slip Treatment 1L

£24.24 £20.20
More Information
EAN 8027365016257
Size Litre 1L

- Direct Chemical Action
- Water Resistant
- Long-Lasting Treatment
- Interior & Exterior Use
- Non-Slip Characteristics 

Full Description

Faber Ys One is a water-based treatment specifically devised and developed to increase surface grip on ceramic, stoneware, quartz, and siliceous stone floors, removing the problems linked to their slippery surfaces. Faber Ys Onet is easy to apply and after treatment with YS ONE, the floor will need no regular maintenance to preserve its non-slip surface. Faber Ys One will not alter the colour of the material treated

Faber Ys One is a unique product that acts directly on the surface of the material to which it is applied, creating micro-erosions that are invisible to the naked eye and which boost the run-off of water to increase surface grip and therefore reduce slipping in wet conditions, either with footwear or bare feet

Suitable For Use On:
- Quartz-Resin Agglomerate
- Molten Basalt
- Glazed Ceramics
- Clinker
- Granite
- Polished/Natural/Textured Porcelain Stoneware

- Approximately 10 to 20 square metres, depending on the determined suitability for the surface

Method Of Use:
- Thoroughly rinse the surface with clean water and allow it to dry
- Apply a layer of Faber Ys One in even coats that cover the whole surface, using a clean brush or roller
- Leave for the amount of time suggested below:
- Ceramic and Stoneware: between 10-40 minutes
- Clinker and quartz-based agglomerates: between 30-60 minutes
- Granites: between 60-90 minutes
- Evenly wet and cover the surface with a layer of Faber Ys One
- Redistribute Faber Ys One, applying a further amount if needed
- Remove all excesses using a liquid vacuum cleaner and then rinse immediately with plenty of clean water
- Remove it from the treated area in the same amount of time used to apply it
- Work in small sections if used on a large surface area

Additional Information:
- Never apply Faber Ys One to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Ys One must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Ys One is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.
Write Your Own Review
You're reviewing:Faber Professional Ys One Water Based Anti Slip Treatment 1L
Your Rating