Facebook Pixel
Faber Hidrofab Dirt Protective Wax Resin Emulsion Self Polishing Treatment
Faber Hidrofab Dirt Protective Wax Resin Emulsion Self Polishing Treatment Faber Hidrofab Dirt Protective Wax Resin Emulsion Self Polishing Treatment
Faber Surface Care

Faber Professional Hidrofab Dirt Protective Wax Polish 1L

£29.64 £24.70
More Information
EAN 8027365016226
Size Litre 1L

- Excellent Self-Polisher
- Protection Against Dirt And Staining
- Protection Against Foot Traffic
- Interior Only
- Water And Oil-Repellent

Full Description
Faber Hidrofab is a water-based wax-resin emulsion to use as a self-polishing, finishing treatment for floors in natural stone, cotto, terracotta, parquet, natural wood, or concrete. Faber Hidrofab is particularly recommended for use on natural stone with a distressed, brushed, or fine sanded finish and can also be used for excellent results on concrete, cementina and cement agglomerates, cotto, terracotta, and porous surfaces in general

Faber Hidrofab leaves the surface with a polished finish and enhances the original colour tone of the material. Faber Hidrofab creates a protective layer that stands out for its excellent water- and oil-repellent characteristics, to protect the surface against the formation of stains. Faber Hidrofab seals the textured surface, creating a dirt-proof layer and making daily cleaning and maintenance operations on the floor much easier

Suitable For Use On:
- Marble/ Marble-Cement Agglomerate
- Slate
- Sandstone
- Concrete
- Granite
- Wood
- Limestone
- Parquet/ Natural Wood
- Quartzite
- Terracotta
- Travertine

Coverage (1 Litre):
- Approximately 15 to 20 square metres, depending on the determined suitability for the surface

Method of Use:
- Thoroughly rinse the surface with clean water and allow it to dry, removing any dust or dirt
- Apply Faber Hidrofab in even coats to a clean and dry surface with a roller, creating an even layer across the surface and keeping the same applied direction
- Redistribute any built-up areas while still working with the product in that specific surface area, but NOT attempting to even out the layer of product material
- Leave for 2-3 hours to fully dry out, a second coat may be necessary once fully dried
- Apply the second coat in a perpendicular direction to the direction of the first coat, creating a “crisscross” application
- Use a mechanical polisher to clean up any flaws created by a build-up of product in a specific surface area and will also increase the surface shine

Additional Information:
- Do not apply Faber Hidrofab to wet or over-heated surfaces
- Any adjacent surfaces not being treated with Faber Hidrofab must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Hidrofab is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.
Write Your Own Review
You're reviewing:Faber Professional Hidrofab Dirt Protective Wax Polish 1L
Your Rating