Faber Professional Solid Wax Paste for Polishing Natural Stone Walls and Worktops 1L

Faber Solid Wax is a fast-drying, solvent-based solid wax to polish and restore surfaces without foot traffic, such as walls, tops and work surfaces. Faber Solid Wax is generally used on natural stone surfaces but it can also be used on cotto, terracotta, cement agglomerates, cementine and terrazzo tiles

Faber Solid Wax formula contains top-quality paraffin and gives an excellent shine to the surfaces, enhancing the tone and look. Faber Solid Wax is also protected against water and stain penetration, thanks to its water and oil repellency, which also make successive cleaning and maintenance operations easier. Faber Solid Wax also stands out for its quick and easy application

Suitable For Use On:
- Marble-Cement Agglomerate
- Granite
- Limestone
- Marble
- Quartzite
- Terracotta
- Travertine

Coverage Guide (1 Litre):
- Approximately 20 to 25 square metres, depending on the determined suitability for the surface

Method of Use:
- Thoroughly rinse the surface with clean water and allow it to dry, removing any dust or dirt
- Apply Faber Solid Wax in even coats to a clean and dry surface with a dry cloth or spatula, creating an even layer across the surface
- Leave for 5-10 minutes to dry to a haze
- Polish the surface manually using a wool-cotton cloth, white or wire wool pad, in small areas at a time and for larger areas use a mechanical polishing machine
- Brush or Polish until all excess has been removed

Additional Information:
- Do not apply Faber Solid Wax to wet or over-heated surfaces
- Any adjacent surfaces not being treated with Faber Solid Wax must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Solid Wax is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.