Facebook Pixel
Faber Finishing Wax Water Based Protective Dirtproof Wax Satin Finish
Faber Finishing Wax Water Based Protective Dirtproof Wax Satin Finish Faber Finishing Wax Water Based Protective Dirtproof Wax Satin Finish
Faber

Faber Showroom Finishing Wax Protective Dirtproof Wax Satin Finish 1L

£29.58 £24.65
More Information
EAN 8027365010460
Size Litre 1L
Downloads

- Effective Protection Against Dirt And Staining
- Excellent Water And Oil Repellent Characteristics
- Excellent Protection Against Foot Traffic
- Indoor Use Only
- Brings Out The Full Aesthetic Qualities Of The Treated Surface

Full Description

Faber Finishing Wax is a self-polishing wax to finish floors in natural stone, cotto, terracotta, parquet or natural wood, or concrete. Faber Finishing Wax seals the textured surface on which it is applied, creating a dirt-proof layer and making daily maintenance operations on the floor much easier

Faber Finishing Wax leaves a polished finish and slightly enhances the original colour tone of the material. Faber Finishing Wax is recommended for use on natural stone with a distressed, brushed or fine sanded finish and can also be used for excellent results on concrete, cementina and cement agglomerates, cotto, terracotta and porous surfaces in general

Suitable For Use On:
- Marble/ Marble-Cement Agglomerate
- Slate, Sandstone
- Basaltina - Lava Stone
- Cementina
- Concrete
- Cotto
- Granite
- Wood
- Limestone
- Parquet Or Natural Wood
- Quartzite
- Terracotta
- Travertine

Coverage:
- Approximately 10-20 squared metres, depending on the determined suitability of the surface

Method Of Use:
- Apply a thick, even layer of Faber Finishing Wax on the surface using a clean roller
- If there is any build-up in an applied area, do not attempt to even out the layer of material: wait for the first layer to cure and then intervene to create a more even finish
- Faber Finishing Wax is fast drying, leave for no longer than 1-2 hours and 4-6 hours until opened for foot traffic
- It may be necessary to add a second coat of product, depending on the absorption level of the surface
- Wait, 2-3 hours between coats, once the first is perfectly dry
- A “crisscross” application is recommended, perpendicular to the first

Additional Information:
- Never apply Faber Finishing Wax to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Finishing Wax must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Finishing Wax is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.

Write Your Own Review
You're reviewing:Faber Showroom Finishing Wax Protective Dirtproof Wax Satin Finish 1L
Your Rating
Trustpilot