Facebook Pixel
Faber Solvent Stripper for Removal of Waxes Treatments and Greasy Dirt
Faber Solvent Stripper for Removal of Waxes Treatments and Greasy Dirt Faber Solvent Stripper for Removal of Waxes Treatments and Greasy Dirt
Faber

Faber Showroom Solvent Stripper for Removal of Wax Treatments and Greasy Dirt 1L

£14.64 £12.20
More Information
EAN 8027365010538
Size Litre 1L
Downloads

- Excellent Wax-Stripping Power 
- High Capacity To Penetrate Into The Material 
- Effective Against Dirt
- Interior & Exterior Use
- Ideal For Removing Oily Dirt

 

Full Description

Faber Solvent Stripper is a solvent-based wax stripper to use on deep cleaning of dirt and organic residues, oxidation, layers of old wax, or existing treatments. Faber Solvent Stripper is suitable for all types of material, whatever its absorption level, indoors and out

Faber Solvent Stripper works deep down, helping to dissolve and easily remove even the most stubborn dirt and greasy or oily surface stains. Faber Solvent Stripper can be used in combination with Faber Alkaline Cleaner or Faber Wax Remover for even deeper cleaning to carry out “double wax stripping”

Suitable For Use On:
- Marble/ Marble Agglomerate
- Slate
- Sandstone
- Basaltina - Lava Stone
- Molten Basalt
- Cementina
- Concrete
- Craquelé/Glazed Ceramics
- Clinker
- Cotto
- Granite
- All Porcelain Stoneware
- Limestone
- Reconstituted Eco Stone
- Porphyry
- Quartzite
- Terracotta
- Travertine
- Tuff

Coverage:
- Approximately 10 to 15 square metres, depending on the determined suitability for the surface

Method Of Use:
- Thoroughly rinse the surface with clean water and allow it to dry
- Apply Faber Solvent Stripper, rubbing it into the surface with a brush, mop, or single-disc machines
- Leave for 5-10 minutes, continuing to wipe over the surface with the tool of choice
- Remove all residues and rinse the whole floor with plenty of clean water, no further action or waiting time is necessary
- If needed, repeat the application process following the same steps and increase the concentration

Additional Information:
- Never apply Faber Solvent Stripper to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Solvent Stripper must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Solvent Stripper is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.

Write Your Own Review
You're reviewing:Faber Showroom Solvent Stripper for Removal of Wax Treatments and Greasy Dirt 1L
Your Rating
Trustpilot