Fila MP90 Eco Xtreme Eco Compatible Water and Oil Repellent Protection
Fila MP90 Eco Xtreme Eco Compatible Water and Oil Repellent Protection
Fila

Fila MP90 Eco Xtreme Eco Compatible Water and Oil Repellent Protection

SALE From £47.87 £39.89 RRP £57.00
SALE From £47.87 £39.89 RRP £57.00
More Information

• Has extremely low VOC emissions.
Hydrocarbon solvent free: environmentally friendly treatment.
• Due to it's water base, it withstands residual humidity and can therefore be applied 24-48 hours after the initial wash, making treatment quicker.
• Does not form surface film and does not yellow.
Ideally suited for protecting kitchen and bathroom tops.
• The treated surfaces are suitable for food contact.

Full Description

Fila MP90 Eco Xtreme eco compatible water and oil repellent protection is water and oil repellent with natural effect.
Environmentally friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt honed finishes.
Fila MP90 Eco Xtreme reduces absorption without affecting the material's natural look.
It is waterproof , protects and facilitates cleaning. Fila MP90 Eco Xtreme is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin marble and stone slabs.
Suitable for treating coloured concrete tiles and reconstructed stones.

Fila MP90 Eco Xtreme provides an anti graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed.
Water and oil repellent: it hampers the absorption of common watery and oily stains.

Suitable for use on:
• Polished Porcelain Tiles
• Marble and Granite
• Natural Stone and Agglomerates
• Concrete.

Coverage
Approximate coverage (1 Litre):
Polished Porcelain Tiles: 30-50 square metres
Polished Marble/Granite: 20-30 square metres
Matte Honed Stone: 10-20 suare metres.

Method of Use:
No dilution required: ready to use.

Application:

Shake before use.
For materials with matt finish (natural stone, terracotta, agglomerates, concrete tiles):Apply MP90 Eco Xtreme evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well.Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.For polished porcelain tiles, natural stone, agglomerates with glossy finish:Apply MP90 Eco Xtreme on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad.Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc floor scrubber.To complete the cycle with the finish:
Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression.

 

 

Write Your Own Review
You're reviewing:Fila MP90 Eco Xtreme Eco Compatible Water and Oil Repellent Protection
Your Rating
Trustpilot