Fila Wet Eco Wet Look Colour Enhancing Protector

Fila Wet Eco Wet Look Colour Enhancing Protector

Fila Wet Eco Wet Look Colour Enhancing Protector is a stain protector and anti dirt product with wet effect for unpolished natural stone surfaces, unpolished agglomerates and terracotta.

Fila Wet Eco Wet Look Colour Enhancing Protector prevents the absorption of stains and facilitates dirt removal.

It is particularly suited for exterior use and also effective for interiors.

Prevents surfaces from flaking.

Fila Wet Eco Wet Look Colour Enhancing Protector Suitable for:

• Unpolished Natural Stones

• Agglomerates

• Terracotta

• Tuff.

Coverage

With 1 Litre:

Unpolished stones and agglomerates: 10-20 square metres

Terracotta: 7-20 square metres

Fila Wet Eco Wet Look Colour Enhancing Protector Method of Use:

No dilution required: ready to use.

Application:

Shake before use. Apply WET ECO evenly and continuously to a clean and dry surface using a flat paintbrush or fleece pad, wetting the grout lines as well. Apply a second coat of the product 2-3 hours later following the same method. Wait at least 12 hours before walking on the surface.Maintenance:diluted solution of CLEANER PRO.

For surfaces with low absorbency (slate, Botticino or Carrara marble) we recommend diluting the product with water (1 litre of product to 1 litre of water). Do not use on polished surfaces. Do not apply the product externally if rain is forecast. The product cannot be applied to supports with problems connected with rising damp. If the product has been applied incorrectly or if thorough cleaning is required, remove WET ECO using NOPAINT STAR.