Facebook Pixel
Fila ZeroSil Silicone Remover removes sticky stuff and tar
Fila ZeroSil Silicone Remover removes sticky stuff and tar Fila ZeroSil Silicone Remover removes sticky stuff and tar
Fila

Fila ZeroSil Silicone Remover Removes Sticky Residues and Tar 250ml

SALE £11.16 £9.30 RRP £14.40
More Information
EAN 8008980692255
Size Litre 250ml

• Gel like consistency: acts directly on the residue you want to remove, thus optimising it's effect and avoiding wastage.
• Quick acting: it dissolves hardened silicone in 20 minutes.
• A pleasant citrus aroma.
• Quick and handy to apply with the included spatula.

Full Description

Fila ZeroSil silicone remover removes sticky stuff and tar removes residues of silicone, glue, adhesive tape, old labels and polyurethane foam.
Fila ZeroSil is also effective for removing candle wax, resin and greasy/oily stains in general.
Fila ZeroSil can be used on marble, stone, grouting joints and other absorbent materials to remove surface residues.
Effective also in removing tar and bitumen stains.

Suitable for use on:
• Porcelain Tiles
• Ceramic
• Marble
• Glass
• Metal.

Method of Use:
No dilution required: ready to use.

Application:
If the residue is particularly stubborn, remove as much as you can with a sharp-edged tool (box cutter, knife or other blade) taking care not to damage the surface.
Shake before use, then apply the product undiluted, so as to cover any silicone residue.
Leave to act for about 20 minutes.
Once the indicated time has elapsed, use the included spatula to scrape off the dissolved residue, then remove it with a cloth or kitchen towel.
If necessary, repeat the application and leave it to act for longer.
Clean the spatula thoroughly after use with a cloth or kitchen towel.
The product may dull methacrylate, plastic and coated surfaces and resin based agglomerates, it should first be tested on these surfaces to verify their resistance. If the affected surface was treated with wax, the coating must be renewed.

The product may dull methacrylate, plastic and coated surfaces and resin based agglomerates, it should first be tested on these surfaces to verify their resistance. If the affected surface was treated with wax, the coating must be renewed.

 

Write Your Own Review
You're reviewing:Fila ZeroSil Silicone Remover Removes Sticky Residues and Tar 250ml
Your Rating
Trustpilot