Facebook Pixel
LTP CRACKLE GLAZE PROTECTOR 500ml
LTP CRACKLE GLAZE PROTECTOR 500ml LTP CRACKLE GLAZE PROTECTOR 500ml
LTP

LTP Crackle Glaze Protector 500ml

SALE £11.00 £9.17 RRP £15.72
More Information
EAN 5031220029026
Size Litre 500ml
Downloads
• A clear colourless barrier
• Protects from penetration of water, dirt, oil, grease & limescale
Full Description
LTP Crackle Glaze Protector

Impregnating Sealer For Interior use only

LTP Crackle Glaze Protector Forms a clear colourless barrier. Helps protect porous tiles from penetration by water, dirt, oil, grease, limescale and other commonly found household contaminants. For use on crackle glaze tiles and grout joints. Maintain with LTP Stonewash or LTP Stonecare

LTP Crackle Glaze Protector Coverage
Approximately 5 sq.m per 500ml (2 coats)

LTP Crackle Glaze Protector Application
Ensure that the tile surface is clean and dry. Any tiles that are to be wet cut should be protected with at least one coat of sealer. Once the tiles have been fixed and before grouting apply at least one coat of sealer with a sponge or soft cloth and then buff immediately into the surface using an LTP Buffing Cloth Blue. This should be done until all excess is removed. Leave for a minimum of two hours before grouting with normal grouts. If coloured or pigmented grouts are used: Apply at least a further three coats and do not buff off excess. Allow 2 hours between each coat. Grout in the joints and remove excess immediately using a sponge and water. Leave grout to harden (approx 2 hours). Use LTP Grout Stain Remover and LTP Black Course Pad to de-bond remaining grout residue and sealer. Wipe of remaining residue with LTP Buffing Cloth Blue. N.B. Due to variations in crackle glaze tiles-always test the product first to ascertain the correct number of coats to be applied. Optional: Once dry (min 24hrs) apply a further coat of sealer to the surface also covering the joints. After 48 hours the surface can be cleaned as normal. Use LTP blue buffing cloth to remove any excess from non-absorbent surfaces. Drying Time: Approximately 30 – 40 minutes. Becomes fully effective after approximately 48 hours. Use only in well ventilated areas. Do not breathe vapours.

LTP Crackle Glaze Protector Aftercare
Wash tiles with a mild, non acidic detergent. LTP Stonewash Spray

LTP Crackle Glaze Protector Storage
Store in a cool, dry, frost-free environment.
Shelf Life – Up to 4 years for unopened containers.

LTP Crackle Glaze Protector Health, safety and environment
Repeated exposure may cause skin dryness or cracking. Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/eye protection. IF SWALLOWED: immediately call a POISON CENTRE or doctor/physician-Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Store in well-ventilated place. Keep cool. Dispose of contents/container to hazardous or special waste collection point.
Write Your Own Review
You're reviewing:LTP Crackle Glaze Protector 500ml
Your Rating
Trustpilot