We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Learn more
LTP External Stone Sealer Water Based Impregnating Sealer for Exterior use
SALE
From
£22.86
£19.05
RRP
£32.64
• Water Based Impregnating Sealer.
• Enviromentally safer & low odour.
• For exterior use.
• Enviromentally safer & low odour.
• For exterior use.
Full Description
LTP External Stone Sealer
LTP External Stone Sealer Moisture-repellent and stain resistant. Delicately enhances appearance. Helps prevent moss and mould formation. Protects against weathering and efflorescence. UV Resistant and non-yellowing.
Breathable. Suitable for use on all types of external masonry including natural and artificial stone, limestone, sandstone, slate, brick and concrete paving
LTP External Stone Sealer Coverage
Lower porosity surfaces 15m2 per litre
Higher porosity surfaces 7.5m2 per litre
LTP External Stone Sealer Application
Preparation:
Ensure surface to be treated is as clean and as dry as possible. If necessary, first wash surfaces down with a dilute solution of LTP Grimex (1:10). Scrub well using a white pad. Rinse well and leave overnight to dry.
Sealing: Shake bottle well before use. Apply evenly to the surface using a foam roller or paint brush. On more absorbent surfaces apply further coats at hourly intervals until the surface is completely saturated. Remove any residual sealer if still visible after one hour.
LTP External Stone Sealer Aftercare
Routinely sweep surfaces to keep them free from organic matter. Surfaces can be washed on a regular basis with LTP Waxwash.
LTP External Stone Sealer Storage
Store in a cool, dry, frost-free environment.
Shelf Life – Up to 2 years for un-opened containers.
LTP External Stone Sealer Other
Dried on over applied sealer can be removed by buffing with a micro-fibre cloth. If dried on residues are left too long and difficult to buff away: apply a little soapy water and gently scrub with a white emulsifying pad, rinse and leave to dry. On higher porosity surfaces sufficient sealer should be applied until treated surfaces are fully saturated. Do not use in temperatures under 5°C or over 25°C. Clean application tools and brushes with water after use.
LTP External Stone Sealer Health, safety and environment
HARMFUL IF INHALED.
HARMFUL TO AQUATIC LIFE WITH LONG LASTING EFFECTS.
Keep out of reach of children. Do not breathe fumes/vapours/spray. Use only outdoors or in a well ventilated area. Avoid release into the environment. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE/doctor if you feel unwell. Dispose of contents/container to hazardous or special waste collection point.
LTP External Stone Sealer Moisture-repellent and stain resistant. Delicately enhances appearance. Helps prevent moss and mould formation. Protects against weathering and efflorescence. UV Resistant and non-yellowing.
Breathable. Suitable for use on all types of external masonry including natural and artificial stone, limestone, sandstone, slate, brick and concrete paving
LTP External Stone Sealer Coverage
Lower porosity surfaces 15m2 per litre
Higher porosity surfaces 7.5m2 per litre
LTP External Stone Sealer Application
Preparation:
Ensure surface to be treated is as clean and as dry as possible. If necessary, first wash surfaces down with a dilute solution of LTP Grimex (1:10). Scrub well using a white pad. Rinse well and leave overnight to dry.
Sealing: Shake bottle well before use. Apply evenly to the surface using a foam roller or paint brush. On more absorbent surfaces apply further coats at hourly intervals until the surface is completely saturated. Remove any residual sealer if still visible after one hour.
LTP External Stone Sealer Aftercare
Routinely sweep surfaces to keep them free from organic matter. Surfaces can be washed on a regular basis with LTP Waxwash.
LTP External Stone Sealer Storage
Store in a cool, dry, frost-free environment.
Shelf Life – Up to 2 years for un-opened containers.
LTP External Stone Sealer Other
Dried on over applied sealer can be removed by buffing with a micro-fibre cloth. If dried on residues are left too long and difficult to buff away: apply a little soapy water and gently scrub with a white emulsifying pad, rinse and leave to dry. On higher porosity surfaces sufficient sealer should be applied until treated surfaces are fully saturated. Do not use in temperatures under 5°C or over 25°C. Clean application tools and brushes with water after use.
LTP External Stone Sealer Health, safety and environment
HARMFUL IF INHALED.
HARMFUL TO AQUATIC LIFE WITH LONG LASTING EFFECTS.
Keep out of reach of children. Do not breathe fumes/vapours/spray. Use only outdoors or in a well ventilated area. Avoid release into the environment. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE/doctor if you feel unwell. Dispose of contents/container to hazardous or special waste collection point.
Related Products
