Facebook Pixel
LTP Grimex Heavy Duty Grime And Stain Remover
LTP Grimex Heavy Duty Grime And Stain Remover LTP Grimex Heavy Duty Grime And Stain Remover
LTP

LTP Grimex Heavy Duty Grime And Stain Remover

SALE From £7.56 £6.30 RRP £11.33
SALE From £7.56 £6.30 RRP £11.33
More Information
Downloads
• stubborn dirt and grime, greasy films, dirty grouting
• old layers of acrylic sealers and wax
• rubber sole marks on glazed ceramics and porcelain
• old and tired looking tiled floors, soot marks on stone fireplaces
Full Description
LTP Grimex Heavy Duty Grime And Stain Remover.

Coverage
In mild cases - approximately 50m2
In more severe cases - approximately 20m2
In extremely severe cases - approximately 5-10m2

LTP Grimex Heavy Duty Grime And Stain Remover Suitable for artificial and natural tiles and floors including travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick, external paving and driveways.

Intensive cleaner, effective for removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors. It is especially effective on stone, travertine, slate, terracotta, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitbale for the general maintenance cleaning of external driveways, patios and paths.

To remove cement and grout stains you may find LTP Grout Stain Remover is a more effective alternative.

Important: Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by sponge.

In mild cases and on absorbent tiles:
Dilute one part LTP Grimex Heavy Duty Grime And Stain Remover in 10 parts warm water. Apply with a cloth or mop. Wipe off thoroughly with a clean damp cloth.
In more severe cases:
Dilute one part LTP Grimex Heavy Duty Grime And Stain Remover in 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary agitate with a scrubbing brush. Leave to react for 5-10 minutes, keeping wet with additional solution. Agitate surface again, mop up and rinse thoroughly with clean water.
In extremely severe cases:
Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.

LTP Grimex Heavy Duty Grime And Stain Remover. This product should not be used for every day cleaning of floors or walls that have been sealed. Cleaned surfaces that have been previously sealed should be re-sealed after using this product. This should be done after rinsing with plenty of clean water and once surfaces have had sufficient time to thoroughly dry (min 24hrs).
Write Your Own Review
You're reviewing:LTP Grimex Heavy Duty Grime And Stain Remover
Your Rating
You may also like...
Trustpilot