LTP Solvex Epoxy Grout Sealer and Wax Remover

LTP Solvex Epoxy Grout Sealer and Wax Remover.
For interior & exterior use.

LTP Solvex Epoxy Grout Sealer and Wax Remover. High Performance Remover suitable for Wax , Silicone, Acrylic, Polyurethane Sealers and Residual Epoxy Grout For Stone, Travertine, Terracotta, Slate, Sandstone, Flag-stones, Quarry Tiles, Glazed Ceramic and Porcelain . A powerful non-caustic stripper that softens most types of surface sealer, which can then be removed with ease. Suitable for removing most wax, oil, silicone, acrylic, polyure-thane sealers and residual epoxy grout.. After washing and rinsing, surfaces are ideal for re-sealing.

LTP Solvex Epoxy Grout Sealer and Wax Remover Coverage
Light Stripping 8-10m2/litre
Deep Stripping 5m2/litre

LTP Solvex Epoxy Grout Sealer and Wax Remover Application.
Pour contents into a glass or metal container (not plastic). Apply generously by dabbing on with a cloth or brush. Work in manageable areas of no more than 5 sq metre and do not brush out. Leave for up to 30 minutes, but do not allow the solution to dry out. If drying should occur within 30 minutes apply a little more solution. Use a course, stiff brush or abrasive pad to remove softened coating from the surface. Repeat the process if unwanted material remains. Wash down with a dilute solution of LTP Grimex, rinse with plenty of water and leave to dry (min 24hrs) before re- sealing. Use natural fibre brushes. Brushes made from synthetic fibres may be damaged by this product. If you are unsure of correct application methods, test on an inconspicuous area, prior to general application. If removing residues from epoxy grout; apply making sure to avoid prolonged contact with the joint as well. Viscous solution should not drip if used on vertical surfaces. Protect acrylic surfaces such as baths and shower trays from contact.