LTP SPOT STAIN REMOVER 500ML

LTP SPOT STAIN REMOVER

Ltp Spot Stain Remover Suitable for Interior & Exterior use Effective at removing the majority of mineral oil and cooking oil stains (including oil spatters). Suitable for use on travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick, concrete and external paving. Combine with LTP Fullers Earth to help remove cooking oil and old stains. The spot stain remover dissolves the stain and the Fullers earth absorbs it by capillary, thus enabling deep down stains to rise to the surface.

Ltp Spot Stain Remover Coverage
(Local applications) about 1.5 – 3 sq/m of stains per 500ml

Ltp Spot Stain Remover Application
On recent stains:
Apply directly onto the stain making sure to spread the solution out to the edge of the tile up to the grout joints and then leave to absorb into the surface for about 5- 10 minutes. Wash well with a dilute solution of LTP Grimex, rinse and then leave to thoroughly dry before re-sealing.
On cooking oil or older stains:
Apply directly onto the stain making sure to spread the solution out to the edge of the tile up to the grout joints and leave to absorb into the surface for about 5 – 10 minutes. Powder the stain with LTP Fuller’s Earth. Wet the powder again with the Spot Stain Remover and then cover it once more with the Fuller’s earth. Leave for 24 hours. Brush away the powder and wash with a dilute solution of LTP Grimex. Rinse well with a sponge and water and leave to thoroughly dry before re- sealing.

Ltp Spot Stain Remover Notes
Do not use on wood, rubber, plastic, asphalt, paint or varnish. For stubborn stains renew the application as many times as necessary. After removing the stain, clean the floor with LTP Grimex. Re-seal the floor to protect against further staining.
Composition: Nonionic surfactants, 5-15%; aliphatic hydrocarbons>30%;perfumes;linalool