Facebook Pixel
LTP WALL AND FLOOR GROUT PROTECTOR 1LTR
LTP WALL AND FLOOR GROUT PROTECTOR 1LTR LTP WALL AND FLOOR GROUT PROTECTOR 1LTR
LTP

LTP WALL AND FLOOR GROUT PROTECTOR 1LTR

SALE £13.94 £11.62 RRP £19.92
More Information
EAN 5031220015012
Size Litre 1L
Downloads
• Forms a clear, colourless barrier.
• Suitable for interior & exterior use.
Full Description
LTP Wall And Floor Grout Protector

LTP Wall And Floor Grout Protector For porous grout in kitchens, bathrooms etc. protects against water, dirt, grease, mould and limescale. Suitable for interior & exterior use. Forms a clear, colourless barrier. Helps protect absorbent, porous grout joints.

LTP Wall And Floor Grout Protector Coverage
Up to 500 linear metres per 1 litre

LTP Wall And Floor Grout Protector Application
Is intended for use only on porous grout joints between non-porous glazed or highly vitrified ceramic tiles (not epoxy grout). Ensure that the grout surface to be treated is completely clean and dry. Allow grout to dry for 24 hours after cleaning. Apply a generous coat of LTP Grout Protector using a small paintbrush and allow to soak in. To avoid leaving a film on the adjoining tiles, wipe away any surplus as you go with a clean, fluff-free cloth, dampened, if necessary, with a little white spirit. Do not treat more than an area of 2 or 3 square metres at a time to ensure that all of the product is absorbed into the grout. Remove any excess LTP Grout Protector which is not absorbed into grout joints within 20 minutes of application. Repeat process after one hour. If necessary, further treatments can be applied after an hour or so. After 48 hours the surface can be cleaned as normal. Use a dry cloth to wipe away any excess from non-absorbent surfaces.
Use only in well ventilated areas. Do not breathe vapours.

LTP Wall And Floor Grout Protector Aftercare
If necessary, wipe over grout joints using a mild detergent. Use LTP Grimex to remove stubborn surface marks, in which case you may need to re-seal treated areas.

LTP Wall And Floor Grout Protector Notes
Please Note:
Protect glass, sanitary ware, polished surfaces, plastics, painted and other sensitive surfaces against splashes. Do not allow excess to dry on the surface. Wipe away carefully. If in doubt, test the product on a small area. Do not use in direct sunlight or in temperatures over 25 degrees C.
Drying Time: Approx 30-40 minutes. Becomes fully effective after approx 48 hours.

LTP Wall And Floor Grout Protector Storage
Store in a cool, dry, frost free environment.
Shelf Life – Up to 4 years for un-opened containers.

LTP Wall And Floor Grout Protector Health, safety and environment
Contains: Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%), Hydrocarbons, C9, aromatics
Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause respiratory irritation. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure.Toxic to aquatic life with long lasting effects.
Keep out of the reach of children. IF SWALLOWED: immediately call a POISON CENTRE or doctor/physician-Do NOT induce vomiting. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe fume, vapours, mist, spray. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear eye protection, protective gloves. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Dispose of contents/container in accordance with local/national regulations. Repeated exposure may cause skin dryness or cracking.
Write Your Own Review
You're reviewing:LTP Wall and Floor Grout Protector - 1L
Your Rating
Trustpilot