Protect stone surfaces from water and oil stains

Due to their appearance and natural strength, stone materials make a great choice for any surface. When water and oil stains appear, you need the right tool to preserve the fantastic appearance of your surfaces and get rid of any unwanted substances without altering them in any way. For this, there is no better choice than Fila MP90 Eco Extreme Water and Oil Protection. Today, you will learn how to protect stone surfaces from water and oil stains. 

To learn more about the best surface cleaning and restoration products or guides, remember to visit the Tiling Logistics blog. Our experienced team personally writes every article posted to the Tiling Logistics blog for beginners and professionals alike. 

To speak to our team and ask any questions, call us at 0121 773 9129 or get in contact via online message.

What you need to protect stone surfaces from water and oil stains

First of all, you need Fila MP90 Eco Extreme.

Fila MP90 Eco Xtreme is an ever-reliable and eco-friendly stain-resistant sealer for a range of stone surfaces. This impregnating sealer defends surfaces against water and oil without altering the surface's original appearance. Furthermore, the solution doesn't yellow after use and leaves no surface film. As a water-based sealer, MP90 also withstands residual humidity. 

On top of water and oil resistance, this water-repellent impregnator provides anti-graffiti protection to the material, preventing paint from bonding. As such, later cleaning is much quicker as substances on the material are more easily removed. 

Additionally, Fila MP90 Eco Xtreme is free of hydrocarbon solvents and has very low VOC emissions certified by GEV and marked by EC1 Plus. 

Fila MP90 Eco Xtreme ready for use on:
- Polished porcelain tiles
- Marble and granite
- Natural stone and agglomerates
- Concrete

How to protect stone surfaces from water and oil stains

Before beginning treatment, make sure your surface is both clean and dry. If rain is forecast, do not apply this product outside.

For materials with matt finish (natural stone, terracotta, agglomerates, concrete titles):

1. Apply Fila MP90 Eco Xtreme

Apply Fila MP90 Eco Xtreme proportionately onto the surface with a brush or fleece pad. Additionally, be sure to wet grout lines.

Gently wipe away the excess using a clean cloth before it dries. 

When treating highly absorbent surfaces, apply two coats of sealer in 20-minute periods. 

For polished porcelain tiles, natural stone and agglomerates with glossy finish:

1. Apply Fila MP90 Eco Xtreme

Apply Fila MP90 Eco Xtreme to the surface, making sure to wet the grout lines, with a brush or fleece pad. 

Quickly get rid of any excess before the impregnator dries. 

2. Rub the sealer into the material

Typically, this product dries within 10-15 minutes. Before this happens, rub the solution into the surface using a microfiber cloth. Ensure the cloth is slightly wetted with the impregnating sealer to improve penetration.

As an alternative, consider using a single-disc floor scrubber if available to speed up the process.

After protecting stone surfaces from water and oil stains

Surfaces are ready for use just 2 hours after treatment. Although, water and oil-repellent defence begin to act after 24 hours.

Maintain surfaces protected against water and oil stains

In order to ensure the long-lasting results of the water-repellent sealer, use Fila Cleaner Pro for regular cleaning.

More Information

For more information on how to protect stone surfaces from water and oil stains with Fila MP90 Eco Xtreme don’t hesitate to get in contact. We are always willing to answer any questions and give advice for using our products.

Members of the team at Tiling Logistics have accumulated a collective 30-plus years’ worth of first-hand experience with all types of stone and tile surfaces. Thanks to our experience, we have an expansive knowledge of the best methods and tools needed for surface treatment. Whether you are working on-site or at home on a DIY project, our team members are sure to offer the best guidance.

Additionally, any advice we give you is free, so don’t hesitate to contact us whenever you need it.

For the advice you need, call us at 0121 773 9129 or get in contact online.

Alternatively, read the material safety data sheet (MSDS) for Fila MP90 Eco Xtreme Water and Oil Repellent Protection.

Why use a colour-enhancing impregnator to protect stone?

Natural stone surfaces are perfect for elevating the appearance of any area they are in thanks to their luxurious and unique texture. However, the beauty of natural stone fades over time without the right protection. This is where a colour-enhancing impregnator comes in. Not only do they restore the appearance of faded stone surfaces, but a colour-enhancing impregnator will also protect surfaces from future alterations to their appearance, including staining. 

Why Faber Stone Colour Enhancer?

Faber Stone Colour Enhancer is a solvent-based, wet-look colour enhancer that elevates the appearance of stone surfaces. It leaves a semi-gloss satin finish on natural stone and materials with non-polished finishes and a medium to high level of absorption. 

Even on especially absorbent surfaces, this impregnator provides an in-depth wet look, while also creating a semi-polished surface finish and a warm colouring. This colouring enhances the natural grain and aesthetics of the surfaces. 

However, Faber Stone Colour Enhancer does more than make surfaces look better, it also protects them and preserves their beautiful appearances. This natural stone sealer offers fantastic water-repellent and stain-proof properties.

This wet-look impregnator is incredibly easy and applying it takes no time at all. 

Are your surfaces suitable for Faber Stone Colour Enhancer?

This colour-enhancing sealer is suitable for a range of natural stone surfaces and medium to high-absorbent surfaces. 

Suitable for Use On:
- Basaltina - Lava rock
- Cementina
- Cotto
- Granite
- Limestone
- Marble
- Porphyry
- Quartzite
- Reconstituted (eco stone)
- Sandstone
- Slate
- Terracotta
- Travertine
- Tuff

This wet-look impregnator is also suitable for use on indoor and outdoor surfaces. 

How to Protect Absorbent Surfaces with Faber Stone Colour Enhancer -

1. Apply the Faber Stone Colour Enhancer 

Pour a generous amount of the impregnator onto the surface using a tool of your choice to ensure an even coat. Use a clean brush, roller or spray. Be sure to cover the entire surface in a layer of the solution. 

2. Leave the solution to act

Wait 10 minutes for the sealer to act. 

Evenly spread excess of the impregnator across the surface with the same tool. Do this until the finished surface is even and homogeneous. Although, this may not be a necessity on especially absorbent surfaces. 

3. Redistibute the residue

Redistribute any residue or excess until completely removed. 

If a second coat is needed, wait 1-2 hours before repeating the process