Faber Showroom Cement Remover Post Installation Detergent 1L

Faber Cement Remover is a concentrated acid-based cleaner specifically developed to wash and clean after the installation of flooring or coverings with cement-based grout. Faber Cement Remover eliminates all residues, including glue, grout, and varnish, without changing the colour of joints and restoring the original appearance to treated surfaces. Faber Cement Remover is extremely effective when it comes to removing inorganic dirt and saline efflorescence

Faber Cement Remover can be applied to all acid-resistant materials which need washing at the end of the installation process or following grouting operations, carried out with adhesives, mortar, or cement-based grout. End-of-installation cleaning with Faber Cement Remover serves to prevent problems that can occur after installation and resulting from a lack of correct cleanings, such as surface patina and more easily soiled surfaces

Suitable For Use On:
- Marble-Quartz Agglomerate
- Slate
- Sandstone
- Basaltina - Lava Stone
- Molten Basalt
- Glazed Ceramics
- Clinker
- Cotto
- Granite
- All Porcelain Stoneware
- Reconstituted Eco Stone
- Porphyry
- Quartzite
- Terracotta
- Tuff

Coverage Guide:
- Approximately 10 to 15 square metres, depending on the determined suitability for the surface

Method Of Use:
- Dilute down to a ratio of 1:2 with water in a bucket
- Thoroughly rinse the surface with clean water and allow it to dry
- Apply over the surface, rubbing the surface with a clean cloth, mop, or single disc machine
- Leave for 5-10 minutes, continuing to wipe over the surface to aid the cleansing action
- Remove all residues and rinse the whole floor with plenty of clean water
- Repeat the application process following the same steps, decreasing the dilution, if necessary

Additional Information:
- Never apply Faber Cement Remover to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Cement Remover must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Cement Remover is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.