Facebook Pixel
+44 (0)121 773 9129
My Cart
Toggle Nav
TilingLogistics
Train Support Supply
Faber Finishing Wax protective dirtproof wax with a satin finish
Faber Finishing Wax protective dirtproof wax with a satin finish
Faber Surface Care

Faber Showroom Finishing Wax Protective Dirtproof Wax Satin Finish 1L

£31.14 £25.95
More Information
EAN 8027365010460
Size Litre 1L

- Effective Protection Against Dirt And Staining
- Excellent Water And Oil Repellent Characteristics
- Excellent Protection Against Foot Traffic
- Indoor Use Only
- Brings Out The Full Aesthetic Qualities Of The Treated Surface

Full Description

Faber Finishing Wax is a self-polishing wax to finish floors in natural stone, cotto, terracotta, parquet or natural wood, or concrete. Faber Finishing Wax seals the textured surface on which it is applied, creating a dirt-proof layer and making daily maintenance operations on the floor much easier

Faber Finishing Wax leaves a polished finish and slightly enhances the original colour tone of the material. Faber Finishing Wax is recommended for use on natural stone with a distressed, brushed or fine sanded finish and can also be used for excellent results on concrete, cementina and cement agglomerates, cotto, terracotta and porous surfaces in general

Suitable For Use On:
- Marble/ Marble-Cement Agglomerate
- Slate, Sandstone
- Basaltina - Lava Stone
- Cementina
- Concrete
- Cotto
- Granite
- Wood
- Limestone
- Parquet Or Natural Wood
- Quartzite
- Terracotta
- Travertine

Coverage:
- Approximately 10-20 squared metres, depending on the determined suitability of the surface

Method Of Use:
- Apply a thick, even layer of Faber Finishing Wax on the surface using a clean roller
- If there is any build-up in an applied area, do not attempt to even out the layer of material: wait for the first layer to cure and then intervene to create a more even finish
- Faber Finishing Wax is fast drying, leave for no longer than 1-2 hours and 4-6 hours until opened for foot traffic
- It may be necessary to add a second coat of product, depending on the absorption level of the surface
- Wait, 2-3 hours between coats, once the first is perfectly dry
- A “crisscross” application is recommended, perpendicular to the first

Additional Information:
- Never apply Faber Finishing Wax to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Finishing Wax must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Finishing Wax is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.

Write Your Own Review
You're reviewing:Faber Showroom Finishing Wax Protective Dirtproof Wax Satin Finish 1L
Your Rating
Downloads
Trustpilot