LTP Grimex | Why Clean Grime?

LTP Grimex | Why Is It Important To Clean Grime?

Have you ever wondered why it is so important to clean grime? LTP Grimex may help you understand and make it look effortless.

In this blog, we will tell you the importance of tile grout and how to remove this dirt and grime, the right way.

THE IMPORTANCE OF CLEANING GRIME

Don’t really know what grime is? Grime is ​​dirt ingrained on the surface of something.

Lazy or sloppy cleaning practices can lead to the fast growth of germs and harmful bacteria which can potentially thrive anywhere.

Failing to keep the entirety of the area clean means encouraging these germs and bacteria to thrive which can cause widespread and prolonged illness.

This is where LTP Grimex comes into play.

This grime and stain remover will kill the germs, but make sure to do this when needed so keep an eye on it.

When left to accumulate, this could possibly lead to mould. Although, it is more likely to develop in areas where water and moisture are common.

Therefore, make sure the job is done thoroughly and not left abandoned.

LTP GRIMEX

LTP Grimex is a heavy-duty, grime and stain remover that is effective at removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural tiles and stone.

This accelerated cleaner aids stain and existing sealant layer removal from floors and tiles, and can also be used for the general care of external driveways, patios and paths.

LTP Grimex makes tackling different cleaning jobs look as simple as changing its level of dilution, which is unimaginably easy.

It is not just indoors where the LTP Grimex shines through, as outdoor surfaces with ingrained dirt can be treated and taken general care of.

The surfaces that it is most effective on are stone, travertine, slate, porcelain, terracotta and quarry tiles.

Also suitable for limestone, sandstone, slate, marble, granite, brick & external paving.

THE APPLICATION OF LTP GRIMEX

First of all, this product will need to be diluted due to the severity of the surface.

In mild cases and or on absorbent tiles: Dilute to a ratio of (Solution:Water) 1:10 with warm water.

Apply the diluted LTP Grimex with a cloth or mop.

Wipe off thoroughly with a clean damp cloth.

In more severe cases: Dilute to a ratio of 1:3 with warm water

Apply the diluted LTP Grimex liberally, spreading over the surface of tiles.

IMPORTANT NOTE: If necessary agitate with a scrubbing brush.

Then, leave to react for 5-10 minutes, keeping wet with additional solution.

Begin to agitate surface again, mop up and rinse thoroughly with clean water.

In extremely severe cases: Use undiluted.

Agitate with a scrubbing brush or mechanical scrubber if necessary.

However, after use, neutralise the treated surface with clean water.

HOW MUCH DOES IT COVER?

Again, this product all depends on the severity of the surface.

In mild cases, a 1-litre bottle can cover up to 50m² with being diluted following the guide. This also means a 5-litre bottle can cover 250m².

With more severe damage to the surface, a 1-litre bottle can only cover up to 20m² and 100m² with a 5-litre bottle.
​​
Now in extremely severe cases, with using a 1-litre bottle concentrated, no dilution, it can cover up to 5-10m² and 25-50m² with a 5-litre bottle.

Overall, LTP Grimex will definitely give you a return on your investment!

WHAT TO AVOID

Avoid the risk and mask and protect painted surfaces, untreated wood and other sensitive areas.

Do not overspray, rinse if necessary.

Any alkalinity or Grimex remaining on surfaces should be completely neutralised. This may be done with a little clean water applied by a sponge.

Should not be used for everyday cleaning of floors or walls that have been sealed.

Cleaned surfaces that have been previously sealed should be re-sealed after using this product.

For more information, click here for a direct link to LTP Grimex Technical Data Sheet

OTHER QUESTIONS

WHY LISTEN TO US?

Well…here at Tiling Logistics, we have experts who have had nearly 30 combined years of first-hand experience in restoration, renovation, maintenance, and sealing of all kinds of stone and tile surfaces.

Whether it's granite, marble, slate, limestone, porcelain, concrete, quarry tiles... the list goes on, but we have worked on them all!

Combine our hands-on expertise with our knowledge of the products and relationships with the manufacturers, and you won't find anyone else in the industry who can train, support, and supply you as we can!

Whether you're on-site or taking on a DIY job at home, we make sure to supply your every need quickly and safely, and we’re not done there.

We really will go above and beyond to make sure our customers are fully satisfied when ordering from Tiling Logistics.

FURTHER ADVICE

Before the use of the product, we always, always advise testing on an inconspicuous area, before general application.

What if you’re not ordering anything but still need advice? No problem, give us a call and we will assist you with anything you may need.

Moreover, we are always willing to support our customers by being available to pick up the phone and guide you if you need help and have any questions.