Faber Showroom Colour Enhancer Matt Finish Impregnator 1L

Faber Colour Enhancer Matt Finish is a solvent-based, colour-enhancing and stain-proof impregnating agent that penetrates the surface without filming. Faber Colour Enhancer Matt Finish has a guaranteed, lasting colour-enhancing, protective effect and is the ideal solution to treat surfaces and objects, even outside, thanks to its excellent resistance to bad weather and to UV rays

Faber Colour Enhancer Matt Finish can also be used on surfaces that, due to their nature, need to remain in continuous contact with water: showers, fountains, washbasins and even kitchen countertops, since the product is certified for contact with foods. Faber Colour Enhancer Matt Finish is not suitable for use on non-absorbent materials or on materials with a polished finish. Faber Colour Enhancer Matt Finish ensures great protection against stains on all medium-absorbent materials with a non-polished finish

This Faber Colour Enhancer Matt Finish also stands out for its excellent water-repellent and stain-proof qualities, which offer effective protection against stains, and the damaging effects of water. Faber Colour Enhancer Matt Finish also makes routine surface maintenance easier, as it limits a surface’s ability to trap dirt, preventing dirt and stains from penetrating below the surface and attaching to the material

Suitable For Use On:
- Marble/ Marble-Resin Agglomerate
- Quartz-Resin Agglomerate
- Slate
- Sandstone
- Basaltina - Lava Rock
- Molten Basalt
- Cementina
- Concrete
- Cotto
- Granite
- Limestone
- Reconstituted Eco Stone
- Porphyry
- Quartzite
- Terracotta
- Travertine
- Tuff

This product is not suitable for use on non-absorbent surfaces or materials with a polished finish

Coverage:
- Approximately 10 to 15 square metres, depending on the absorption level of the surface

Method Of Use:
- Thoroughly rinse the surface with clean water and allow it to dry
- Apply a thick, even layer of Faber Colour Enhancer Matt Finish that covers the whole surface, using a clean brush, roller, cloth, or sprayer
- Leave for around 10 minutes
- Redistribute any residue or excess until completely removed
- If a second coat is needed, wait 1-2 hours before repeating the process

Additional Information:
- Do not wash the surface for 24-48 hours for best results
- Never apply Faber Colour Enhancer Matt Finish to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Colour Enhancer Matt Finish must be protected
- It is important to test the solution on an inconspicuous area before general application

The Faber Colour Enhancer Matt Finish is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.