Facebook Pixel
Faber P147 Colour Enhancing Impregnator Matt Finish Non Filming Treatment for Absorbent Surfaces 1L
Faber P147 Colour Enhancing Impregnator Matt Finish Non Filming Treatment for Absorbent Surfaces 1L Faber P147 Colour Enhancing Impregnator Matt Finish Non Filming Treatment for Absorbent Surfaces
Faber Surface Care

Faber Professional P147 Colour Enhancing Impregnator Matt Finish 1L

£41.76 £34.80
More Information
EAN 8027365016127
Size Litre 1L
Downloads

- Strong Colour-Enhancing Impregnator
- Stain Proof
- Water and Oil Repellent
- Interior & Exterior Use
- Ideal On Wet Areas

Full Description

Faber P147 is a solvent-based, impregnating, colour-enhancing, stain-proof and wet-look non-filming treatment. It is used to enhance the colour and tone of absorbent surfaces, adding a matt finish without creating a surface film. Faber P147 has a lasting effect, can withstand UV rays and the elements and will not yellow if exposed to sunlight

Faber P147 uniquely penetrates deep into the materials without creating a surface film and it is extremely simple to apply without the risk of uneven aesthetic finishes. Faber P147 is specifically indicated to be used outdoors or on surfaces that, due to their nature, need to withstand conditions with the continued presence of water, such as showers, fountains and washbasins

Faber P147 confers excellent water-repellent and stain-proof qualities, making daily cleaning and maintenance of treated surfaces easier. Faber P147 is also certified for use with foods

Suitable for Use On:
- Marble and Marble Agglomerates
- Resin Agglomerates
- Slate
- Sandstone
- Concrete
- Cotto
- Granite
- Limestone
- Reconstituted Eco Stone
- Quartzite
- Terracotta
- Travertine
- Tuff

Coverage Guide (1 Litre):
- Approximately 15 to 20 square metres, depending on the determined suitability for the surface

Method of Use:
- Clean the surface, making sure to remove any dust or dirt present
- Apply an even, abundant coat of product, using a clean brush or roller, to cover the whole surface being treated
- Leave for 5-10 minutes and continue to distribute any excess product across the surface area, evenly. May not be necessary on particularly absorbent surfaces
- If any excess is still there 30-45 minutes after application, remove the surface residues using a dry, clean cloth
- Faber P147 is fast drying and will dry within 1-2 hours
- If the surface needs another coat, it is possible to apply another 2-3 hours after the initial coat

Additional Information:
- Never apply to wet or overheated surfaces
- Any adjacent surfaces not being treated with Faber P147 must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber P147 is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.

 
Write Your Own Review
You're reviewing:Faber Professional P147 Colour Enhancing Impregnator Matt Finish 1L
Your Rating
You may also like...
Trustpilot