Faber A2 Mix Polishing Powder 5KG For Marble Limestone And Travertine

Faber A2 Mix is high-performance polishing for calcareous matierals. Thanks to a specifically crafted formula, this polishing powder achieves superficial vitreous thickness and a perfect polished surface on limestone and marble tiling. 

After application, this polishing powder leaves surfaces with top-levels of sharpness and brightness. Faber A2 Mix reacts with the stone material to polish it and offer resistance to heavy foot traffic and stains. 

This marble and limestone polishing powder doesn't contain any wax. 

Method of Use:
- Apply 1-2 scoops of the polishing powder to each section of the surface
- Add a few drops of water to the powder
- Start buffing the floor in circular motions using a single-disc machine and white floor pad (spend the same amount of time buffing each tile)
- Maintain a creamy consistency by adding more water when required
- Rinse the area with clean water
- Remove all water from the marble or limestone surface with a wet vacuum

Usage:
- When polishing honed or very opaque stone materials, use a greater amount of Faber A2 Mix. Pass over the surface at least 20 times with a single-disc machine.
- For the maintainence of slightly worn out tiling use less of the polishing powder and make 15 passages. 

Coverage:
- Polishing - 40-50 m2/kg
- Maintainence - 50-100m2/kg