Faber Professional Hidro 500 ECO Stain Proof Sealer 5L

Faber Hidro 500 ECO is an eco-friendly water-based stain-proof impregnator for natural stones. Its special formulation has been developed to ensure a very strong stain-proof feature on natural polished stones, without altering the original look. Faber Hidro 500 ECO penetrates deeply into the stone and confers strong protection against rising dampness, salt and efflorescence, and water rising from the screed or from the adhesive

The treatment with Faber Hidro 500 ECO is often suggested before the fixing of the stone tile, but it can be also applied after the installation, before the grouting operation

Suitable for Use On:
- Marble
- Granite
- Limestone
- Other Natural Stones

Coverage Guide (1 Litre):
- Approximately 10 to 15 square metres, depending on the determined suitability for the surface

Method of Use:
- Clean away any surface residues before application
- Thoroughly rinse with clean water and allow it to dry
- Apply Faber Hidro 500 ECO over the surface, rubbing the surface with a clean cloth, brush, or roller
- Leave for 5-10 minutes, apply until all residues are removed
- After treatment, leave for at least 24 hours before any operations
- If not properly removed, the product generates a residue that is easily removable by using a cleaning product diluted in water with a brush.

Additional Information:
- Any adjacent surfaces not being treated with Faber Hidro 500 ECO must be protected
- Product ready to use
- It is important to test the solution on an inconspicuous area before general application

The Faber Hidro 500 ECO is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.