Fila FOB Xtreme Water and Oil Repelent Protection
Fila FOB Xtreme Water and Oil Repelent Protection

Fila FOB Xtreme Water and Oil Repelent Protection

SALE From £50.33 £41.94 RRP £57.00
SALE From £50.33 £41.94 RRP £57.00
More Information

• Does not alter original colour and appearance.
• Does not form surface film.
• Does not alter terracotta frost resistance.
• Excellent on rustic ground terracotta and tumbled marble.
• Ideal for use near kitchens, barbeques and and car driveways.
• Ideal for internal and external surfaces.
• The treated surfaces are suitable for food contact.

Full Description

Fila FOB Xtreme water and oil repellent protection is a professional transparent breathable treatment. Fila FOB Xtreme hampers the absorption of common watery and oily stains.
Fila FOB Xtreme has a protective base coat before waxing internal surfaces with rustic or textured finishes.
Fila FOB Xtreme is excellent for coloured concrete tiles, natural effect breathing protection.

Suitable for use on:
• Natural Stone and Agglomerates
• Marble and Granite
• Concrete
• Tuff
• Wpc
• Terracotta
• Quarry Tiles.

Approximate Coverage (1 Litre):
Stone: 10-30 square metres
Terracotta rustic Tuscan, polished: 15-20 square metres
Terracotta handmade: up to 10 square metres
Concrete: up to 5 square metres
Polished Marble/Granite: up to 30 square metres.

Method of Use:
No dilution required: ready to use.

For materials with matt finish (indoors and outdoors):Apply the product evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries (roughly 10-15 minutes).For glossy or brushed finishes (indoors and outdoors):Apply FOB Xtreme on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad. Before the product dries (roughly 10-15 minutes), rub the surface and remove any residues using a microfibre cloth wetted with the product. Dry the surface with a clean cloth.When requested on high-absorption materials, apply two coats of the product with an 8-hour interval in between (e.g.: highly-trafficked areas, humid areas, outdoor surfaces).To speed up the process, it is possible to treat the surface with a single-disc floor scrubber.To complete the cycle with the finish: on porous materials such as natural stone, reconstructed tiles, agglomerates and concrete tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect (Matt, Satin, Classic, Longlife).

Never apply FOB Xtreme onto a surface that is already waxed. Do not apply FOB Xtreme during the hottest hours of the day in summer. Carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression.



Write Your Own Review
You're reviewing:Fila FOB Xtreme Water and Oil Repelent Protection
Your Rating