Facebook Pixel
LTP BOILED LINSEED OIL
LTP BOILED LINSEED OIL
LTP

LTP Boiled Linseed Oil Traditional Pre-Polish Sealer for Terracotta

SALE From £14.38 £11.98 RRP £21.07
SALE From £14.38 £11.98 RRP £21.07
More Information
Downloads
• Traditional Pre-Polish Sealer for Terracotta.
• Interior use only
• Offers good mechanical strength
Full Description
LTP Boiled Linseed Oil Traditional Pre-Polish Sealer for Terracotta

LTP Boiled Linseed Oil Coverage
Medium Porosity Terracotta: 1-2 litres per 10m2
Higher Porosity Terracotta: 3-4 litres per 10m2

LTP Boiled Linseed Oil A rich golden coloured oil ideal for protecting and enhancing machine and hand made terracotta. Fills and hardens within the open pores of the terracotta inhibiting the absorption of grime and fluids. Offers good mechanical strength to low fire hand made terracotta. IMPORTANT: Do not let the oil oxidise on the surface of the tile. Remove any surplus, not absorbed into the tiles, within one hour of application using a clean cloth and, if necessary, a little Genuine Turpentine. Experiment on spare tiles to establish the number of coats required to achieve full saturation.

LTP Boiled Linseed Oil Application
Apply by brush a coat at a time until the tiles are saturated. Allow at least 12 hours between each coat to ensure that the oil thoroughly oxidises. Most Terracotta will take one or two coats to reach saturation, while others, particularly some of hand made terracotta, may take as many as four or five coats. Leave the final coat to dry for at least 24 hours before polishing with LTP Clear or Antique Wax or finishing with LTP Ironwax Gloss or Satin.

LTP Boiled Linseed Oil Traditional sealer for terracotta.
For protecting and enhancing machine and hand made terracotta. Fills and hardens within the open pores of the terracotta inhibiting the absorption of grime and fluids. Offers good mechanical strength to low fired handmade terracotta.

IMPORTANT: Do not let the oil oxidise on the surface of the tile. Remove any unabsorbed surplus within one hour of the application using a clean cloth and, if necessary, a little Genuine Turpentine. Experiment on spare tiles to establish the number of coats required to achieve full saturation.

Keep out of the reach of children.
Do not drink.
Keep/Store away from clothing/combustible materials.
Store in a closed container.
Dispose of contents/container to hazardous waste collection point.
May cause minor irritation on skin contact. May cause minor irritation on eye contact. Label in Accordance With (EC) No 1272/2008
DO NOT LEAVE SOILED APPLICATION CLOTHS WHERE THEY MAY CONSTITUTE A FIRE RISK, AS THEY ARE LIABLE TO SPONTANEOUS COMBUSTION.

Important:
All rags and cloths used should be immediately burnt, or if this is not possible soaked in soapy water before disposing of in a bin. The application cloths should never be crumpled up into a ball.
Write Your Own Review
You're reviewing:LTP Boiled Linseed Oil Traditional Pre-Polish Sealer for Terracotta
Your Rating
Trustpilot