Facebook Pixel
+44 (0)121 773 9129
My Cart
Toggle Nav
TilingLogistics
Train Support Supply
LTP Colour Intensifier and Stain Block H2O 5L Tile and Stone Sealer
LTP Colour Intensifier and Stain Block H2O 5L Tile and Stone Sealer
LTP Tile and Stone Cleaning, Sealing and Maintenance

LTP Colour Intensifier and Stain Block H2O 5L Tile and Stone Sealer

£90.14 £75.12
More Information
EAN 5031220042056
Size Litre 5L

- Water-Based Impregnating Sealer
- Colour Enhancing
- Eco Friendly
- Low Odour
- Interior & Exterior Use

Full Description

LTP Colour Intensifier and Stain Block H2O 5L is a water-based colour-enhancing impregnating sealer suitable for interior and exterior use. 

LTP Colour Intensifier and Stain Block H2O 5L provides an enhanced but natural finish and has strong protection against staining and repelling water, oil and grease. LTP Colour Intensifier and Stain Block H2O 5L allow the surface to comfortably breathe and help reduce efflorescence.

Enhanced natural finish strong protection against staining repelling water oil grease breathability 

LTP Colour Intensifier and Stain Block H2O 5L Suitable For Use On:
- Natural Stone
- Artificial Stone
- Quarry
- Brick
- Concrete
- Paving
- Honed, Rough Cut and Polished Surfaces.

LTP Colour Intensifier and Stain Block H2O 5L Coverage Guide (1 Litre):
- Polished Surfaces: Approx 30 square meters 
- Low Porosity Surfaces: Approx 15 square meters 
- High Porosity Surfaces: Approx 7.5 square meters

LTP Colour Intensifier and Stain Block H2O 5L Method of Use:
- The surface must be completely clean, dry and free from contamination
(If necessary, LTP Grimex is recommended to clean the floor and allow it to dry thoroughly)
- Shake before use
- If the surface is rough cut, tumbled, textured or riven, then apply LTP Colour Intensifier and Stain Block H2O 5L generously with a roller or a paintbrush
- If the surface is honed, smooth and polished, then apply LTP Colour Intensifier and Stain Block H2O 5L liberally and in even coats using a sealant applicator, lint-free cloth, lamb’s wool applicator or sponge
- Leave the surface for one hour, until completely dry, and remove any visible excess residual sealer using a microfibre cloth
- If another coat is needed or the surface is not fully saturated, allow 60 minutes of drying time before applying a further coat.

LTP Colour Intensifier and Stain Block H2O 5L Additional Information:
- If applies, be sure to turn off underfloor heating prior to sealing
- It is important to test the solution on an inconspicuous area before general application
- Avoid the use of strong detergents to wash the treated surface

The LTP Colour Intensifier and Stain Block H2O 5L are available through Tiling Logistics, the natural stone renovation specialist based in Birmingham. We strive for same-day dispatch service and free delivery is available on orders over £100.

Write Your Own Review
You're reviewing:LTP Colour Intensifier and Stain Block H2O 5L Tile and Stone Sealer
Your Rating
Downloads
Trustpilot