Faber DPS Professional Stain-Resistant Colour-Enhancing Impregnating Sealer

Faber DPS is a unique solvent-based protector which gives treated surfaces strong water-repellent protection to avoid the risk of rising or the absorption of water or humidity. 

Faber DPS can even be used on surfaces that have already been damaged due to humidity-related issues such as salt and efflorescences, rust and oxidations. Perfect for the restoration of surfaces after installation, leaving a nice natural look finish.

Due to its unique formulation, Faber DPS can penetrate deep into the material for several millimetres, allowing its strong protection against water.

Suitable For Use On:
- Natural Stones
- Marble
- Limestone
- Travertine
- Granite
- Agglomerates

Coverage Guide (1 Litre):
- Approximately 10-15 square metres per litre, depending on the absorption capacity of the surface

Method of Use:
- Remove any dust or dirt present on the surface
- Apply an even, abundant coat of Faber DPS, using a clean brush, lambswool, roller or cloth, to cover the entire surface being treated
TIP: If you find the material very absorbent, apply a second coat ‘crossing’ the first one
- Leave for around 10-15 minutes to act on the material 
- Usually does not create any residue, but if that is the case begin removing any surface residues using a clean, dry cloth or white pad
- If the surface needs another coat, it is possible to apply another 2-3 hours after the initial coat
- Wait only 1 hour for drying time from the application as Faber DPS is fast-drying

The surface can be opened to floor traffic for about 4 hours from application.

Maintenance Cleaning:
- For regular cleaning, we recommend Faber Neugel or Faber Algafloor
- For heavy-duty cleaning, we recommend Faber 30 or Faber Deterfug

Additional Information:
- Never apply to wet or overheated surfaces
- Any adjacent surfaces not being treated with Faber DPS must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber DPS Stain-Resitant Water-Repellent Impregnating Sealer is available through Tiling Logistics, the natural stone renovation specialist based in Birmingham. We strive for same-day dispatch service and free delivery is available on orders over £100.