Faber Limestone Densifier Professional Impregnating and Hardening Sealer 5L

Faber Limestone Densifier is a water-based impregnating and hardening sealer specifically for limestone surfaces. 

It was developed solely to reduce the difficulty and time needed for the mechanical sanding and polishing process of lime-based materials. Typically, these materials are more difficult to polish than other stone materials because of their porosity and capacity for water absorption. 

It works to fill pores within the material greatly reducing water absorption.

Key Features

Eco-Friendly - Faber Limestone Densifier is a 100% water-based sealer with an eco-friendly formula without volatile organic compounds (V.O.C Free). As such, its not harmful to the environment or health of users, before or after application. 

Breathable - This limestone impregnating sealer maintains the original breathability of the material. It doesn’t create a film. 

Robust Protection - As the name suggests, Faber Limestone Densifier penetrates deep down into the limestone surface and hardens it. This ensures a durable and long-lasting defence against anything harmful to the limestone. 

Protects Against:
- Rusting
- Flaking
- Saline Efflorescence
- Pop-ups
- Damp Marks
- Foot Traffic
- Dirt

Benefits - General Use

Quick Drying - Use of Faber Limestone Densifiers requires very little waiting time before other treatments. 

Stain-proofing - Any stain-proofing solution applied later has a much greater performance.

Food Safe - This limestone sealer is certified for contact with foods making it valid for use in kitchen worktops.

Coverage - 10/15 m2 per litre

Benefits - Sanding and Polishing Process 

Faber Limestone Densifier has many unique benefits when part of the sanding and polishing process

Greater Results - The polishing grain achieves better results on surfaces sealed with Limestone Densifier.

Faster Process - After using Faber Limestone Densifier, the entire polishing and sanding process takes much less time. This allows you to work on large surfaces with less concern for time.

Tool Use- It reduces wear and tear on polishing tools and the amount of water necessary. 

Method of Use:

- Apply Faber Limestone Densifier to the entire surface
- After 10 minutes, spread the residues with a flat microfibre mop head or brush
- Wait 1 - 2 hours
- Remove the residues with a white pad or microfibre cloth after the solution dries