Facebook Pixel
+44 (0)121 773 9129
My Cart
Toggle Nav
TilingLogistics
Train Support Supply
Faber Hidro 150 Water Based Stain Proof Impregnator for Natural Stone
Faber Hidro 150 Water Based Stain Proof Impregnator for Natural Stone
Faber Surface Care

Faber Professional Hidro 150 Water Based Stain Proof Impregnator for Natural Stone

From £47.94 £39.95
From £47.94 £39.95
More Information

- Stain-Proof Treatment
- Water-Repellant
- Water Based
- Protection Against Dirt and Staining
- Certified for Food Use
- Interior & Exterior Use

Full Description

Faber Hidro 150 is a protective, stain-proof treatment, specifically developed to give top-ranking, lasting protection against stains to natural stone and all materials requiring it. Faber Hidro 150 is a neutral product that will not alter the tone or colouring of the material to which it is applied. It is resistant to UV rays, will not yellow over time, and is suitable for use on indoor and outdoor surfaces.

Faber Hidro 150 is also certified for use with foods and therefore, it can be used to apply stain-proof treatment to kitchen worktops. Faber Hidro 150 can also be used as a surface stain-proofing surface treatment in conjunction with a high penetrant water-repellent primer.

Suitable for Use On:
- Terracotta
- Travertine
- Slate
- Sandstone
- Concrete
- Granite
- Porcelain
- Sandstone
- Limestone
- Marble/ Marble Agglomerates
- Quartzite

Coverage Guide (1 Litre):
- Approximately 15 to 20 square metres, depending on the determined suitability for the surface

Method of Use:
- The surface must be completely clean, dry, and free from contamination using the recommended cleaners
- Thoroughly rinse with clean water and allow it to dry, never use Faber Hidro 150 on a wet or over-heated surface
- Apply an even, thin coat to the surface with a clean cloth, brush or roller
- Faber Hidro 150 is fast drying and usually does not create residues
- Remove any slight residues with a clean, dry cloth
- If the desired result is not achieved, repeat the application process following the same steps 45 minutes after the initial coat

Additional Information:
- Wear appropriate protective gear
- Any adjacent surfaces not being treated with Faber Hidro 150 must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Hidro 150 is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.

 

Write Your Own Review
You're reviewing:Faber Professional Hidro 150 Water Based Stain Proof Impregnator for Natural Stone
Your Rating
You may also like...
Trustpilot