Faber Deep Enhancer Professional Colour Enhancing Matt Finish Sealer

Faber Deep Enhancer is a solvent-based, impregnating, colour-enhancing, stain-proof and wet-look non-filming protective treatment to revive ultra-compact surfaces characterised by minimum absorption capacity. Faber Deep Enhancer is used to enhance the colour and tone of more compact materials and adds a matt finish without creating a surface film. 

Faber Deep Enhancer is specifically indicated to be used outdoors or on surfaces that, due to their nature, need to withstand conditions with the continued presence of water, such as showers, fountains and washbasins. Faber Deep Enhancer is able to penetrate the least absorbent materials, creating a solution that is truly one of a kind.

Faber Deep Enhancer confers excellent water-repellent and stain-proof qualities to the surfaces to which it is applied, making daily cleaning and maintenance of treated surfaces easier. Faber Deep Enhancer is certified for use with foods.

Suitable for Use On:
- Granite
- Limestone
- Marble
- Travertine
- Craquelé and Glazed Ceramics
- Resin Agglomerates
- All Porcelain stoneware
- Molten
- Basalt
- Clinker

Coverage Guide (1 Litre):
- Approximately 20 to 30 square metres, depending on the determined suitability for the surface

Method of Use:
- Thoroughly rinse the surface with clean water and allow it to dry, removing any dust or dirt
- Apply a layer of Faber Deep Enhancer in even coats that cover the whole surface, using a clean brush or roller
- Leave for 5-10 minutes before beginning to proceed to re-distribute the excess product, taking care to achieve even coverage at the end of treatment
- After 20-30 minutes after applying the product, proceed to remove all residues thoroughly, making sure all excesses have been removed with a white or lambswool pad
- Faber Deep Enhancer is fast drying and dries within 1-2 hours from application

Additional Information:
- Any adjacent surfaces not being treated with Faber Deep Enhancer must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Deep Enhancer is available through Tiling Logistics, the natural stone renovation specialist based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £100.