Faber Showroom Shine Repair Light Polishing Cream for Scratches and Defects 250ml

Faber Shine Repair Light is a water-based cream solution to be used on dark coloured surfaces, including glazed polished and full-body polished porcelain ceramic tile to minimize scratches and defects. Faber Shine Repair Light is suitable to increase the sheen on dull areas of the surface and restore or reduce the visibility of scratches. Faber Shine Repair Light can be used to reduce the dirt sensibility of surfaces where ordinary cleaning is more difficult and less effective

Faber Shine Repair Light is ready to use and it’s suitable for DIY applications. The application of Faber Shine Repair Light can be done manually or by using a low-speed polishing tool with a white pad. The achievable result with Faber Shine Repair Light  depends on how deep or stubborn the defects are and on how carefully and precisely the application is done

Suitable For Use On:
- Light Toned Glazed Polished Porcelain Ceramic Tiles

Coverage:
- Depends on the consumption

Method Of Use:
- Thoroughly rinse the surface with clean water and allow it to dry
- Faber’s Deep Degreaser is recommended to thoroughly clean the surface
- Shake the bottle well before use
- Apply a small amount onto the surface to be treated
- Begin to buff Faber Shine Repair Light on the surface with the white pad in circular motions, making sure to treat the whole surface evenly
- The time varies, depending on how deep or stubborn the defects are.
- Whilst buffing, keep checking the surface to see the achieved result.
- Continue this process until the desired result has been achieved
- Once the desired result are achieved, remove all excess and rinse immediately with plenty of clean water

Additional Information:
- It may be necessary to execute up to 10 consecutive applications of the product depending on how deep or stubborn the defects are
- Faber Shine Repair Light is a specific solution to be used on dark coloured surfaces
- Never apply Faber Shine Repair Light to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Shine Repair Light must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application

The Faber Shine Repair Light is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.