We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Learn more
Faber Showroom Aqua Treatment Stain Proof Impregnator Natural Effect 1L
£47.94
£39.95
| EAN | 8027365010354 |
|---|---|
| Size Litre | 1L |
- Excellent Stain-Proofing Properties
- High Penetration Capacity
- Invisible Treatment
- Interior & Exterior Use
- Certified For Contact With Foods
Full Description
Faber Aqua Treatment is a water-based, stain-proof impregnator for the completely invisible protective treatment of all types of absorbent material against staining agents, including liquids such as wine or coffee, or fats such as oil or grease. Faber Aqua Treatment prevents the staining agent from penetrating the material and in this way, it stops the surface from becoming stained
Faber Aqua Treatment makes routine surface maintenance easier, as it limits a surface’s ability to trap dirt, preventing it from penetrating below the surface and attaching to the material. Faber Aqua Treatment will not change the appearance, tone,- Excellent Stain-Proofing Properties
- High Penetration Capacity
- Invisible Treatment
- Interior & Exterior Use
- Certified For Contact With Foods or colour of the treated surface. Faber Aqua Treatment is completely free from volatile organic compounds. It is also eco-compatible and certified for contact with foods. This is why it is the ideal stain-proofing treatment for kitchen tops in stone or agglomerates
Suitable For Use On:
- Cement Marble Agglomerate
- Marble Resin Agglomerate
- Quartz Resin Agglomerate
- Slate
- Sandstone
- Basaltina - Lava Stone
- Clinker
- Cotto
- Granite
- Limestone
- Marble
- Marble/Granite/Quartz Worktops
- Porphyry
- Quartzite
- Terracotta
- Travertine
- Tuff
Coverage:
- Approximately 10 to 15 square metres, depending on the absorption level of the surface
Method Of Use:
- Thoroughly rinse the surface with clean water and allow it to dry
- Apply a thick, even layer of Faber Aqua Treatment that covers the whole surface, using a clean brush, roller, cloth, or sprayer
- Leave for around 10 minutes
- Redistribute any residue or excess until completely removed
- If a second coat is needed, wait 1 hour before repeating the process
Additional Information:
- Never apply Faber Aqua Treatment to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Aqua Treatment must be protected
- It is important to test the solution on an inconspicuous area before general application
The Faber Aqua Treatment is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.
Faber Aqua Treatment makes routine surface maintenance easier, as it limits a surface’s ability to trap dirt, preventing it from penetrating below the surface and attaching to the material. Faber Aqua Treatment will not change the appearance, tone,- Excellent Stain-Proofing Properties
- High Penetration Capacity
- Invisible Treatment
- Interior & Exterior Use
- Certified For Contact With Foods or colour of the treated surface. Faber Aqua Treatment is completely free from volatile organic compounds. It is also eco-compatible and certified for contact with foods. This is why it is the ideal stain-proofing treatment for kitchen tops in stone or agglomerates
Suitable For Use On:
- Cement Marble Agglomerate
- Marble Resin Agglomerate
- Quartz Resin Agglomerate
- Slate
- Sandstone
- Basaltina - Lava Stone
- Clinker
- Cotto
- Granite
- Limestone
- Marble
- Marble/Granite/Quartz Worktops
- Porphyry
- Quartzite
- Terracotta
- Travertine
- Tuff
Coverage:
- Approximately 10 to 15 square metres, depending on the absorption level of the surface
Method Of Use:
- Thoroughly rinse the surface with clean water and allow it to dry
- Apply a thick, even layer of Faber Aqua Treatment that covers the whole surface, using a clean brush, roller, cloth, or sprayer
- Leave for around 10 minutes
- Redistribute any residue or excess until completely removed
- If a second coat is needed, wait 1 hour before repeating the process
Additional Information:
- Never apply Faber Aqua Treatment to wet or damp surfaces
- Any adjacent surfaces not being treated with Faber Aqua Treatment must be protected
- It is important to test the solution on an inconspicuous area before general application
The Faber Aqua Treatment is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.
Related Products
