We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Learn more
Faber Professional Hidrofab Dirt Protective Wax Polish 1L
£31.14
£25.95
| EAN | 8027365016226 |
|---|---|
| Size Litre | 1L |
- Excellent Self-Polisher
- Protection Against Dirt And Staining
- Protection Against Foot Traffic
- Interior Only
- Water And Oil-Repellent
Full Description
Faber Hidrofab is a water-based wax-resin emulsion to use as a self-polishing, finishing treatment for floors in natural stone, cotto, terracotta, parquet, natural wood, or concrete. Faber Hidrofab is particularly recommended for use on natural stone with a distressed, brushed, or fine sanded finish and can also be used for excellent results on concrete, cementina and cement agglomerates, cotto, terracotta, and porous surfaces in general
Faber Hidrofab leaves the surface with a polished finish and enhances the original colour tone of the material. Faber Hidrofab creates a protective layer that stands out for its excellent water- and oil-repellent characteristics, to protect the surface against the formation of stains. Faber Hidrofab seals the textured surface, creating a dirt-proof layer and making daily cleaning and maintenance operations on the floor much easier
Suitable For Use On:
- Marble/ Marble-Cement Agglomerate
- Slate
- Sandstone
- Concrete
- Granite
- Wood
- Limestone
- Parquet/ Natural Wood
- Quartzite
- Terracotta
- Travertine
Coverage (1 Litre):
- Approximately 15 to 20 square metres, depending on the determined suitability for the surface
Method of Use:
- Thoroughly rinse the surface with clean water and allow it to dry, removing any dust or dirt
- Apply Faber Hidrofab in even coats to a clean and dry surface with a roller, creating an even layer across the surface and keeping the same applied direction
- Redistribute any built-up areas while still working with the product in that specific surface area, but NOT attempting to even out the layer of product material
- Leave for 2-3 hours to fully dry out, a second coat may be necessary once fully dried
- Apply the second coat in a perpendicular direction to the direction of the first coat, creating a “crisscross” application
- Use a mechanical polisher to clean up any flaws created by a build-up of product in a specific surface area and will also increase the surface shine
Additional Information:
- Do not apply Faber Hidrofab to wet or over-heated surfaces
- Any adjacent surfaces not being treated with Faber Hidrofab must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application
The Faber Hidrofab is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.
Faber Hidrofab leaves the surface with a polished finish and enhances the original colour tone of the material. Faber Hidrofab creates a protective layer that stands out for its excellent water- and oil-repellent characteristics, to protect the surface against the formation of stains. Faber Hidrofab seals the textured surface, creating a dirt-proof layer and making daily cleaning and maintenance operations on the floor much easier
Suitable For Use On:
- Marble/ Marble-Cement Agglomerate
- Slate
- Sandstone
- Concrete
- Granite
- Wood
- Limestone
- Parquet/ Natural Wood
- Quartzite
- Terracotta
- Travertine
Coverage (1 Litre):
- Approximately 15 to 20 square metres, depending on the determined suitability for the surface
Method of Use:
- Thoroughly rinse the surface with clean water and allow it to dry, removing any dust or dirt
- Apply Faber Hidrofab in even coats to a clean and dry surface with a roller, creating an even layer across the surface and keeping the same applied direction
- Redistribute any built-up areas while still working with the product in that specific surface area, but NOT attempting to even out the layer of product material
- Leave for 2-3 hours to fully dry out, a second coat may be necessary once fully dried
- Apply the second coat in a perpendicular direction to the direction of the first coat, creating a “crisscross” application
- Use a mechanical polisher to clean up any flaws created by a build-up of product in a specific surface area and will also increase the surface shine
Additional Information:
- Do not apply Faber Hidrofab to wet or over-heated surfaces
- Any adjacent surfaces not being treated with Faber Hidrofab must be protected
- It is important to test the solution on an inconspicuous area before general application
- Surfaces must be between 5 and 40°C before application
The Faber Hidrofab is available through Tiling Logistics, the natural stone renovation specialists based in Birmingham. We strive for a same-day dispatch service and free delivery is available on orders over £75.
Related Products
You may also like...
